Tumblr 101: Tips And Tricks To Get Started
Sebastian Thrun: Google's Driverless Car
11 Quick Fixes for Gadget Disasters
11) Ejecting a CD That's Stuck in the CD Player
The problem: Can't get a DVD or CD out of the player?
The fix: Your first plan of attack should be to locate the small hole, or tiny black button, on the front of the player (it may be behind a faceplate). Press the button with a toothpick or straightened paper clip. If the disk doesn't eject, try to gently pry it out. Wrap a thin knife, like a nail file, with double-sided tape. Place a small piece of paper on one side of the knife, and then carefully insert the knife, sticky side down, into the player. Try to get the stuck CD to adhere to the tape, and then slowly pull it out. This method was originally intended for car stereos but could possibly work for your home devices as well.
Related LInks:
- Fix it or Toss It? (What to Do With Your Broken Gadgets)
- Got a Computer Virus? Here's What to Do (and Not Do)
- 10 Ways to Speed Up Your Computer Now
16 Grammys Looks That Weren't Working
Whitney Houston Autopsy: Cause of Death Determined?
Worst Movie Mistakes: Date Night Edition (PHOTOS)
Whitney Houston, Bobbi Kristina: Late Singer's Daughter Hospitalized
Adele Five-Year Break? Singer Plans to Focus on Relationship, Write 'Happy Record'
PHOTOS: President Obama's Kissing Technique
Jennifer Hudson Whitney Tribute: Grammy President Reveals Why Singer Was Chosen for Musical Memorial
Grammy 2012 Winners' List: Adele Sweeps Music's Biggest Night
How Hattie Lost 300 Pounds: 'I Was Ready To Do Whatever It Took To Survive'
3 Economic Misconceptions That Need to Die
5-Hour Energy: A Success Equal Parts Caffeine, Chemistry and Meditation
Matt Bomer Comes Out As Gay
People With Easy-To-Pronounce Names More Likely To Succeed, Study Says
Katy Perry Grammy Performance 2012: Did the Diva Diss Her Ex-Hubby With Revealing New Song?
Photos Of Dead Lacrosse Player's Injured Body Shown To Jury
Whitney Houston Dead: Stars React to Legend's Sudden Death
Grammy Awards 2012: The Best & Worst Of The Red Carpet!
12 Grammys Stars Who Gave Good Style
The Top 10 Slacker Colleges
15 Funny Valentine's Day Cards
Mystery Disease Kills Thousands
WATCH: 25 Million Tons Of Japan Tsunami Debris Headed Directly Our Way
Remembering The People's Ballerina
Oprah Under Fire For Controversial Tweet
PHOTOS: Thank God For Grown-Up Glamour
JUNGLE SURVIVAL: Marines Drink Snake Blood, Eat Insects
PHOTOS: Model Falls At Dennis Basso Show
New Clues, Details Emerge In Powell Case
PHOTOS: Kate Spends Valentine's Day Solo!
Most Eligible Post 50 Celebs
PHOTOS: Beautiful Scars
15 Funny Valentine's Day Quotes
Comments
2
Subscribe to commentskathyMar 14th 2009 6:32PM
I have a flash drive that won't work any more. I need my files. I have tried everything. Does anyone know how I can get my files off the flash drive?
MikeMar 14th 2009 7:44PM
Sorry, but you are most likely out of luck. I have 20+ years experience in what is called firmware or embedded programming that deals with the lowest levels of understanding both hardware and the programs that control it. I also had a FLASH drive "die" and did extra research myself, but couldn't get my files back.
Most of the FLASH drives consist of a single device (IC/chip) and contain the storage and the I/O circuits (Input/Output). Those that don't would pretty much require expert servicing to determine what, if anything could be done.
If you cannot access the device at all, there are only a few things to try.
1) Fairly obvious is to try another computer. This can deal with multiple problems, but these are two possible causes:
a) blown fuse in the USB port (typically limited to 0.5 to 1.0 amps), or possibly a worn/dirty connector.
NOTE: Do check the FLASH drive and the USB connectors for contaminants like dust, hair, or pocket lint that would prevent a good electrical connection, or metal (foil, wire) that would cause a short circuit.
2) If you use a USB hub that does not plug in with a power cord, it may have an overload of devices connected, and simply does not have enough power to run everything at the same time. Try disconnecting some of the devices, (may need to, or want to reboot the computer), then try your FLASH drive again.
It is possible that an overload could exist without blowing the USB port's fuse inside the computer.
NOTE: There is usually a fuse for each individual USB port, so simply trying another computer port should get around a blown fuse. The unpowered hubs can only spread the limited power between their output ports, and several devices can take too much, and taking some off the hub could help.
Another possibility is that the FLASH drive may not have had the file(s) and the directory completely written before the drive was unplugged. Your operating system might require a "safely remove hardware" command, (like EJECT), to complete writing the file and the directory into the FLASH drive before it is OK to unplug it. If this is the problem, the file(s) *might* be in the drive and could be recovered by a professional data recovery service, or a special utility to get past an incomplete directory.
Also, the driver for the USB device or FLASH drive *might* have been corrupted in your computer by a virus or other malware, or even a hard disc flaw, and reinstalling it would work (refer to item 1 about trying another computer). NOTE: Different size and different manufacturers FLASH drives may not use the same driver, so even if another drive works, the driver for the other could be bad.
If you had the FLASH drive in your pocket, perspiration or moisture may have gotten into a sensitive spot. Try putting it in a warm (not hot) place for a day or so to allow it to dry out, then try again.
In the "old days", semiconductor devices were sensitive to static electricity. Newer devices have built-in protection, but it *can* be overpowered by extra-strong static electric discharges. If that caused the problem by damaging the "chip", even microsurgery on the device might not be able to get your files back.
Best of luck to you!
P.S. I personally would NEVER, EVER put any electronic component in an ordinary ZIPLOC bag (like step 7 recommends for a hard drive). I would only use an anti-static bag.